Back of the Main unit module
1 – Snap fit slot (top, bottom)
2 – Breakable plastic part covering the top/bottom entry point
3 – Rubber gasket
4 – Main power supply inlet mating pins
5 – Contact springs: Auxiliary power supply, RS-485 communication
6 – Main power supply outlet mating pins
7 – Contact springs: Charging cable locking mechanism, Locking plug (for the Output socket module only), Proximity Pilot (PP), Control Pilot (CP)
8 – Back view of lead screw holes for attaching the Main unit module to the Dock module
Snap fit slot (top, bottom)
Snap fit slots (top, bottom) on the side surface of the Main unit are intended for attaching the Main unit module to the Dock module. Snap fit tabs of the Dock module fit into these slots. When attaching the Main unit module to the Dock module, the tabs snap into the slots.
Breakable plastic part covering the top/bottom entry point
On the side surface, two breakable plastic parts are available that serve as covers for the top and bottom entry points when not in use. If the power supply cable is routed through the top entry point, the top plastic part should be broken and removed; otherwise, the bottom one should be removed. This step ensures that the installed power supply cable does not prevent the attachment of the Main unit module to the Dock module.
Rubber gasket
The rubber gasket is intended for the purpose of waterproofing.
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.