Fasteners – Main unit module
The front cover is locked with a screw (by default) or with a tamper-proof screw (optional).
Four screws are needed for assembling the Main unit module with the Dock module. Refer to Installation for more detailed information.
Location | Purpose | Screw specification | Screw head type and size | Material | Quantity | Torque [Nm] |
|---|---|---|---|---|---|---|
Front cover to the Main unit | The screw fixes the front cover to the Main unit module. | PT 4 × 16 mm | Torx T20 | stainless steel | 1 | 1 |
Front cover to the Main unit | Tamper-proof screw fixes the front cover to the Main unit module and prevents uncontrolled removal of the cover. * | PT 4 × 16 mm | Torx T20 with pin | stainless steel | 1 | 1 |
Assembly screw points 7, 8, 9, and 10 | Fixing the Main unit module to the Dock module. | PT 4 × 16 mm | Torx T20 | stainless steel | 4 | 2 |
* The tamper-proof screw is an optional customer choice. A special screwdriver matched with the screw head with a pin is attached in the Main unit module packaging box.
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.