Recommended tools for the installation
Measuring tape
Drill machine
Drill bit (Ø = 8 mm) for inserting wall inserts
Hammer
Utility knife
Wire strippers
Cable rippers
Screwdrivers PH1 and PH2,
Torque wrench Torx T20 (2 Nm)
Voltmeter
Electrical installation safety tester with EVSE adapter
Drill-hole template
Warning! Before installing, wiring, handling or accessing the charging station in any way, make sure to read, understand and follow the Safety Guidelines.
Any graphic material provided in this documentation library is subject to variation and may not reflect the most recent updates or changes due to ongoing development and the implementation of new features.
Owing to periodic improvements of our products, the supplied products can differ in some details from the information stated in this documentation library. The information is subject to alteration without notice.
The English version of this documentation is the official and authoritative source of information. We make every effort to ensure that translations are accurate and clear; however, we do not accept responsibility for any errors, omissions, or misinterpretations in translated versions. In case of discrepancies, the English version will take precedence.